MacDermid Enthone 50-Series Cat-L-Epoxy Ink
(Recommended for Screen Printing)
50-Series Cat-L-Inks are permanent, two component, epoxy-based screen printing inks. They may be used with a selection of catalysts which cure at elevated and/or room temperatures. When properly applied and cured, Cat-LInks have excellent adhesion to photoimageable, thermal and UV solder masks, glass, metal and plastic. They have excellent chemical and thermal resistance properties.
Available Sizes: 1 Quart and 1 Gallon Containers
Characteristics: Superior adhesion to epoxy, glass, metal or other nonporous surfaces designed for rubber stamping or offset printing. Excellent resistance to abrasion, MEK, alcohol, TCE, flux removers, salt, acid and alkali solutions when properly cured.
MacDermid Enthone M-Series Epoxy Inks
(Recommended for Marking, Roll to Roll Transfer, Printing, Stamping)
M-Series
inks are permanent, two component, epoxy-based marking inks. They may
be used with a selection of catalysts which cure at elevated and/or room
temperatures. When properly applied and cured, M-Series inks have
excellent adhesion to glass, metal and thermo-setting plastics. They
have excellent chemical and thermal resistance properties.
Available Sizes: Bi-Paks (1/3 oz.), 6 Ounce Kits, 1 Quart Kits.
Catalyst is sold separately.; 20/A, 45, 77, 9, B13/28, B3, No. 5.
Mixing Ink With Catalyst: Add 1 part catalyst to 6 parts ink by weight.
ACCESSORY PRODUCTS
AD2001 Thinner for nominal adjustments in viscosity. Incrementally add 3-6% by weight.
AD2002 Thinner for spray applications. Add 25-40% by volume.
AD2003 Retarder to extend open time. Incrementally add 3-6% by weight.
AD3002 Flow agent to eliminate crawling, pin-holing and bubbling. Incrementally add 2-4% by weight. Mix gently to avoid over mixing.
Questions or comments call us at 800-969-6699 or email us at sales@RubberStampsRUs.com