12.5 Gram 2 Part Epoxy Packet - White
These 12.5 Gram Epoxy white Ink Packets are ideal for in-field use and consists of two components, pre-measured in a two-part packet and separated by a single clip.
View the epoxy ink packet instructions here;
1. The clip is removed allowing the two sides to migrate.
2. The two components are mixed thoroughly by kneading and dispensed directly from the packet.
SURFACES: ceramics, phenolic, polyesters, melamine, silicone's, ferrous and non-ferrous metals, glass, electronic parts DRYING TIME: dries to touch within 2 - 3 hours. Adding heat shortens curing time. Max. adhesion and chemical resistance takes 7 - 10 days. Requires addition of catalyst immediately before use.
The following are starting point guidelines to
determine temperature and times to achieve a
crosslinked ink film.
DRYING TIME - Room Temperature: ADE Series dries to touch in
approximately 30-60 minutes and cures in 5-7
days.
Force-Drying/Curing: Baking ADE prints produces
the hardest, most durable finish. Bake most ADE printed colors for approximately
10 minutes at a maximum range of 300°-325° F
(150°-164°C). Temperatures above 325°F (164°C)
may result in discoloration.
Meets Mil Spec: CID A-A-56032D Types I & III Formerly: MIL-I-43553b.
COLOR: White
COLOR SYSTEM: Pigment
SOLVENT SYSTEM: Glycol Either
Let us know if you need the Glass Plate, Ink Roller / Brayer and the type of marking device needed to complete your order.
Questions or comments call us at 800-969-6699 or email us at sales@RubberStampsRUs.com